Journal of Multidisciplinary Applied Natural Science
##plugins.themes.gdThemes.journalSlogan##
Scopus CiteScore 2025
2.1
Calculated on 05 May, 2025
SJR 2025
0.25
Powered by scimagojr.com
##plugins.themes.gdThemes.journalSlogan##
2.1
Calculated on 05 May, 2025
0.25
Powered by scimagojr.com
https://doi.org/10.47352/jmans.2774-3047.439
Safira Zidna Salama
Venty Suryanti
Maulidan Firdaus
Syafira Narendraduhita
To promote sustainable chemical transformation and environmentally friendly approaches, balance economic feasibility and ecological protection are essential. In this study, cellulose ethers, such as methyl cellulose (MC), carboxymethyl cellulose (CMC), and hydroxypropyl cellulose (HPC), were successfully synthesized from banana (Musa balbisiana Colla) blossom cellulose (BBC) through the Williamson ether reaction using a green ultrasonication method at ambient temperature for 30–40 mins. A simple ultrasonic bath system was employed to facilitate efficient cavitation under mild and accessible operating conditions. The yields of MC, CMC, and HPC were 96.5, 98.3, and 97.5%, with corresponding degrees of substitution (DS) of 2.00, 0.71, and 0.86, respectively. An environmental assessment of each synthesis was conducted using Environmental Assessment Tool for Organic Syntheses (EATOS) software and Andraos worksheets, evaluating substrates, solvents, products, and by-products. The results demonstrated that this method offers significant advantages, including low environmental impact, minimal chemical consumption, and near-ideal green chemistry parameters, such as atom economy (AE), reaction yield, stoichiometric factor (1/SF), material recovery (MRP), and reaction mass efficiency (RME), outperforming conventional methods reported in the literature.
[1] V. Suryanti, T. Kusumaningsih, D. Safriyani, and I. S. Cahyani. (2023). "Synthesis and Characterization of Cellulose Ethers from Screw Pine (Pandanus tectorius) Leaves Cellulose as Food Additives". International Journal of Technology. 14 (3): 659–668. 10.14716/ijtech.v14i3.5288.
DOI: https://doi.org/10.14716/ijtech.v14i3.5288[2]S. Acharya, Y. Hu, H. Moussa, and N. Abidi. (2017). "Preparation and Characterization of Transparent Cellulose Films Using an Improved Cellulose Dissolution Process". Journal of Applied Polymer Science. 134 (21): 1–12. 10.1002/app.44871.
DOI: https://doi.org/10.1002/app.44871[3]N. A. F. Mat Nasir, C. K. Wong, J. Jamaluddin, and N. Adrus. (2024). "Effect of Mercerization on the Properties of Cellulose Fiber and Cellulose Hydrogel Extracted from Pineapple Leaf Fiber". ChemistrySelect. 9 (40): e202402719. 10.1002/slct.202402719.
DOI: https://doi.org/10.1002/slct.202402719[4]Y. Nurhaliza, F. Nurulhaq, S. M. Yudhanto, and V. Suryanti. (2022). "Edible Film from Microcrystalline Cellulose (MCC) of Waste Banana (Musa paradisiaca) Stem and Chitosan". Journal of Physics: Conference Series. 2190 (1): 012027. 10.1088/1742-6596/2190/1/012027.
DOI: https://doi.org/10.1088/1742-6596/2190/1/012027[5]E. W. Trisnawati, V. Suryanti, and E. Pramono. (2024). "Fabrication and Evaluation of PVDF Membranes Modified with Cellulose and Cellulose Esters from Peanut (Arachis hypogea L.) Shell for Application in Methylene Blue Filtration". JCIS Open. 16 : 100123. 10.1016/j.jciso.2024.100123.
DOI: https://doi.org/10.1016/j.jciso.2024.100123[6]E. W. Trisnawati, V. Suryanti, E. Pramono, I. S. Cahyani, and D. Safriyani. (2023). "Synthesis of Cellulose Acetate from Screw Pine (Pandanus tectorius) Leaves for Enhancing Water Permeability and Fouling Resistance of PVDF Membrane". Indonesian Journal of Chemistry. 23 (5): 1436–1444. 10.22146/ijc.85726.
DOI: https://doi.org/10.22146/ijc.85726[7]E. W. Trisnawati, I. S. Cahyani, D. Safriyani, E. Pramono, and V. Suryanti. (2023). "Cellulose, Cellulose Benzoate and Cellulose Citrate from Screw Pine (Pandanus tectorius) Leaves as PVDF Filler for Improved Permeability and Anti-fouling Properties". Periodica Polytechnica Chemical Engineering. 67 (3): 504–515. 10.3311/PPch.22043.
DOI: https://doi.org/10.3311/PPch.22043[8]R. Prithivirajan, P. Narayanasamy, N. A. Al-Dhabi, P. Balasundar, R. S. Kumar, K. Ponmurugan, T. Ramkumar, and S. Senthil. (2020). "Characterization of Musa paradisiaca L. Cellulosic Natural Fibers from Agro-discarded Blossom Petal Waste". Journal of Natural Fibers. 17 (11): 1640–1653. 10.1080/15440478.2019.1588826.
DOI: https://doi.org/10.1080/15440478.2019.1588826[9]M. Rincón-Iglesias, E. Lizundia, and S. Lanceros-Méndez. (2019). "Water-Soluble Cellulose Derivatives as Suitable Matrices for Multifunctional Materials". Biomacromolecules. 20 (7): 2786–2795. 10.1021/acs.biomac.9b00574.
DOI: https://doi.org/10.1021/acs.biomac.9b00574[10]P. McNeice, G. H. Ten Brink, U. Gran, L. Karlson, R. Edvinsson, and B. L. Feringa. (2024). "Cellulose Modification for Sustainable Polymers: Overcoming Problems of Solubility and Processing". RSC Sustainability. : 369–376. 10.1039/D3SU00317E.
DOI: https://doi.org/10.1039/D3SU00317E[11]S. Z. Salama, M. Firdaus, and V. Suryanti. (2024). "Cellulose Ethers from Banana (Musa balbisiana Colla) Blossom Cellulose: Synthesis and Multivariate Optimization". Indonesian Journal of Chemistry. 24 (1): 200–212. 10.22146/ijc.86769.
DOI: https://doi.org/10.22146/ijc.86769[12]N. E. Idrissi, H. Aitbella, N. Merle, F. Cazaux, J. P. P. Ramalho, L. Belachemi, H. Kaddami, and P. Zinck. (2025). "Cellulose Nanocrystals-supported Organocatalyst for the Synthesis of Cyclic Carbonates via Cycloaddition of Carbon Dioxide to Epoxide". Carbohydrate Polymers. 364 : 123762. 10.1016/j.carbpol.2025.123762.
DOI: https://doi.org/10.1016/j.carbpol.2025.123762[13]P. Devi and A. K. Dalai. (2019). "Effects of Carboxymethyl Cellulose Grafting on Stability and Reactivity of Zerovalent Iron in Water Systems". Journal of Cleaner Production. 229 : 65–74. 10.1016/j.jclepro.2019.04.364.
DOI: https://doi.org/10.1016/j.jclepro.2019.04.364[14]P. Adamou, E. Harkou, A. Villa, A. Constantinou, and N. Dimitratos. (2024). "Ultrasonic Reactor Set-ups and Applications: A Review". Ultrasonics Sonochemistry. 107 : 106925. 10.1016/j.ultsonch.2024.106925.
DOI: https://doi.org/10.1016/j.ultsonch.2024.106925[15]W. Wongvitvichot, S. Pithakratanayothin, S. Wongkasemjit, and T. Chaisuwan. (2021). "Fast and Practical Synthesis of Carboxymethyl Cellulose from Office Paper Waste by Ultrasonic-Assisted Technique at Ambient Temperature". Polymer Degradation and Stability. 184 : 109473. 10.1016/j.polymdegradstab.2020.109473.
DOI: https://doi.org/10.1016/j.polymdegradstab.2020.109473[16]A. Mahyudin, Emriadi, H. Abral, A. Labanni, Muldarisnur, M. F. Rozi, G. E. Putri, and S. Arief. (2024). "Use of Low-Energy Ultrasonication to Enhance the Purity and Morphology of Cellulose Nanofibers Prepared from Areca Nut Shells". ChemistrySelect. 9 (40): e202402705. 10.1002/slct.202402705.
DOI: https://doi.org/10.1002/slct.202402705[17]Z. A. Feng, D. Yang, J. J. Guo, Y. K. Bo, L. S. Zhao, and M. An. (2023). "Optimization of Natural Deep Eutectic Solvents Extraction of Flavonoids from Xanthoceras sorbifolia Bunge by Response Surface Methodology". Sustainable Chemistry and Pharmacy. 31 : 100904. 10.1016/j.scp.2022.100904.
DOI: https://doi.org/10.1016/j.scp.2022.100904[18]B. C. Yong, A. A. Abdul Raman, A. Buthiyappan, and M. I. I. Z. Abidin. (2020). "Synthesis and Characterization of Sugarcane Bagasse Cellulose-Capped Silver Nanoparticle Using Ultrasonic Irradiation for the Adsorption of Heavy Metal". Asia-Pacific Journal of Chemical Engineering. 15 (3): 1–8. 10.1002/apj.2433.
DOI: https://doi.org/10.1002/apj.2433[19]W. E. Prasetyo, T. Kusumaningsih, M. Firdaus, S. D. Marliana, V. Suryanti, A. N. Artanti, I. Apriana, and S. D. Anggraini. (2021). "Diacylphloroglucinol Derivatives as Antioxidant Agents: Green Synthesis, Optimisation, In Vitro, and In Silico Evaluation". Natural Product Research. 36 (6): 1460–1466. 10.1080/14786419.2021.1889542.
DOI: https://doi.org/10.1080/14786419.2021.1889542[20]M. Amoneit, D. Weckowska, S. Spahr, O. Wagner, M. Adeli, I. Mai, and R. Haag. (2024). "Green Chemistry and Responsible Research and Innovation: Moving Beyond the 12 Principles". Journal of Cleaner Production. 484 : 144011. 10.1016/j.jclepro.2024.144011.
DOI: https://doi.org/10.1016/j.jclepro.2024.144011[21]F. M. Kerton. (2025). "Applying the Principles of Green Chemistry to Achieve a More Sustainable Polymer Life Cycle". Current Opinion in Green and Sustainable Chemistry. 51 : 100996. 10.1016/j.cogsc.2024.100996.
DOI: https://doi.org/10.1016/j.cogsc.2024.100996[22]S. I. Kaya, G. Ozcelikay-Akyildiz, and S. A. Ozkan. (2024). "Green Metrics and Green Analytical Applications: A Comprehensive Outlook from Developing Countries to Advanced Applications". Green Analytical Chemistry. 11 : 100159. 10.1016/j.greeac.2024.100159.
DOI: https://doi.org/10.1016/j.greeac.2024.100159[23]M. Tobiszewski, M. Marć, A. Gałuszka, and J. Namieśnik. (2015). "Green Chemistry Metrics with Special Reference to Green Analytical Chemistry". Molecules. 20 (6): 10928–10946. 10.3390/molecules200610928.
DOI: https://doi.org/10.3390/molecules200610928[24]M. S. S. Danish. (2023). "Exploring Metal Oxides for the Hydrogen Evolution Reaction (HER) in the Field of Nanotechnology". RSC Sustainability. 1 (9): 2180–2196. 10.1039/D3SU00179B.
DOI: https://doi.org/10.1039/D3SU00179B[25]N. Outili, H. Kerras, C. Nekkab, R. Merouani, and A. H. Meniai. (2020). "Biodiesel Production Optimization from Waste Cooking Oil Using Green Chemistry Metrics". Renewable Energy. 145 : 2575–2586. 10.1016/j.renene.2019.07.152.
DOI: https://doi.org/10.1016/j.renene.2019.07.152[26]U. Sultan, K. Städtke, A. Göpfert, D. Lemmen, E. Metwalli, S. Maiti, C. Schlumberger, T. Yokosawa, B. A. Zubiri, E. Spiecker, N. Vogel, T. Unruh, M. Thommes, and A. Inayat. (2023). "Substituting Fossil-Based with Bio-based Chemicals: The Case of Limonene as a Greener Pore Expander for Micellar Templated Silica". RSC Sustainability. 1 (6): 1449–1461. 10.1039/D3SU00068K.
DOI: https://doi.org/10.1039/D3SU00068K[27]T. Kusumaningsih, W. E. Prasetyo, and M. Firdaus. (2020). "A Greatly Improved Procedure for the Synthesis of an Antibiotic-Drug Candidate 2,4-Diacetylphloroglucinol over Silica Sulphuric Acid Catalyst: Multivariate Optimisation and Environmental Assessment Protocol Comparison by Metrics". RSC Advances. 10 (53): 31824–31837. 10.1039/D0RA05424K.
DOI: https://doi.org/10.1039/D0RA05424K[28]L. A. Gallego-Villada. (2025). "Green Chemistry Metrics: Insights from Case Studies in Fine Chemical Processes". Sustainable Chemistry and Pharmacy. 46 : 102062. 10.1016/j.scp.2025.102062.
DOI: https://doi.org/10.1016/j.scp.2025.102062[29]V. C. Badgujar, K. C. Badgujar, P. M. Yeole, and B. M. Bhanage. (2021). "Investigation of Effect of Ultrasound on Immobilized C. rugosa Lipase: Synthesis of Biomass Based Furfuryl Derivative and Green Metrics Evaluation Study". Enzyme and Microbial Technology. 144 : 109738. 10.1016/j.enzmictec.2020.109738.
DOI: https://doi.org/10.1016/j.enzmictec.2020.109738[30]P. Lakhani, S. Kane, H. Srivastava, U. Goutam, and C. K. Modi. (2023). "Sustainable Approach for the Synthesis of Chiral β-Aminoketones Using an Encapsulated Chiral Zn(II)-Salen Complex". RSC Sustainability. 1 (7): 1773–1782. 10.1039/D3SU00210A.
DOI: https://doi.org/10.1039/D3SU00210A[31]J. A. Sirviö and J. P. Heiskanen. (2017). "Synthesis of Alkaline-Soluble Cellulose Methyl Carbamate Using a Reactive Deep Eutectic Solvent". ChemSusChem. 10 (2): 455–460. 10.1002/cssc.201601270.
DOI: https://doi.org/10.1002/cssc.201601270[32]I. Silva, B. Agüero, N. Barrios, M. Herrera, L. Pal, and J. Pereira. (2025). "Interfacial Properties of Cellulose Derivatives from Guinea Grass (Megathyrsus maximus)". Journal of Surfactants and Detergents. 28 (4): 947–960. 10.1002/jsde.12853.
DOI: https://doi.org/10.1002/jsde.12853[33]K. Haggag, H. S. El-Sayad, S. A. El-Moez, and I. A. El-Thalouth. (2014). "Preparation and Characterization of Methylcellulose Derivatives from Cellulosic Wastes". Research Journal of Textile and Apparel. 18 (3): 42–50. 10.1108/RJTA-18-03-2014-B006.
DOI: https://doi.org/10.1108/RJTA-18-03-2014-B006[34]A. S. Pujokaroni, Y. Ohtani, and H. Ichiura. (2020). "Ozone Treatment for Improving the Solubility of Cellulose Extracted from Palm Fiber". Journal of Applied Polymer Science. 138 (1): 1–11. 10.1002/app.49610.
DOI: https://doi.org/10.1002/app.49610[35]R. Suriyatem, N. Noikang, T. Kankam, K. Jantanasakulwong, N. Leksawasdi, Y. Phimolsiripol, C. Insomphun, P. Seesuriyachan, T. Chaiyaso, P. Jantrawut, S. R. Sommano, T. M. P. Ngo, and P. Rachtanapun. (2020). "Physical Properties of Carboxymethyl Cellulose from Palm Bunch and Bagasse Agricultural Wastes: Effect of Delignification with Hydrogen Peroxide". Polymers. 12 (7): 1505. 10.3390/polym12071505.
DOI: https://doi.org/10.3390/polym12071505[36]P. Yu, Y. Hou, H. Zhang, W. Zhang, S. Yang, and Y. Ni. (2019). "Characterization and Solubility Effects of the Distribution of Carboxymethyl Substituents Along the Carboxymethyl Cellulose Molecular Chain". BioResources. 14 (4): 8923–8934. 10.15376/biores.14.4.8923-8934.
DOI: https://doi.org/10.15376/biores.14.4.8923-8934[37]V. Miljković, I. Gajić, and L. Nikolić. (2021). "Waste Materials as a Resource for Production of CMC Superabsorbent Hydrogel for Sustainable Agriculture". Polymers. 13 (23): 4115. 10.3390/polym13234115.
DOI: https://doi.org/10.3390/polym13234115[38]M. Akhlaq, H. Maqsood, M. Uroos, and A. Iqbal. (2022). "A Comparative Study of Different Methods for Cellulose Extraction from Lignocellulosic Wastes and Conversion into Carboxymethyl Cellulose". ChemistrySelect. 7 (29): e202201533. 10.1002/slct.202201533.
DOI: https://doi.org/10.1002/slct.202201533[39]K. Arai and T. Shikata. (2017). "Hydration/Dehydration Behavior of Cellulose Ethers in Aqueous Solution". Macromolecules. 50 (15): 5920–5928. 10.1021/acs.macromol.7b00848.
DOI: https://doi.org/10.1021/acs.macromol.7b00848[40]G. Cremer, S. Danthine, V. Van Hoed, A. Dombree, A. S. Laveaux, C. Damblon, R. Karoui, and C. Blecker. (2023). "Variability in the Substitution Pattern of Hydroxypropyl Cellulose Affects Its Physico-Chemical Properties". Heliyon. 9 (2): e13604. 10.1016/j.heliyon.2023.e13604.
DOI: https://doi.org/10.1016/j.heliyon.2023.e13604[41]G. P. Filho, R. M. N. Assunção, C. Carla, J. G. Vieira, and G. S. Oliveira. (2007). "Synthesis and Characterization of Methylcellulose from Sugar Cane Bagasse Cellulose". Carbohydrate Polymers. 67 (2): 182–189. 10.1016/j.carbpol.2006.05.007.
DOI: https://doi.org/10.1016/j.carbpol.2006.05.007[42]R. K. Singh. (2013). "Methylcellulose Synthesis from Corn Cobs: Study of the Effect of Solvent Conditions on Product Properties by Thermal Analysis". Journal of Thermal Analysis and Calorimetry. 114 (2): 809–819. 10.1007/s10973-013-3032-4.
DOI: https://doi.org/10.1007/s10973-013-3032-4[43]R. L. Oliveira, J. G. Vieira, H. S. Barud, R. M. N. Assunção, G. R. Filho, S. J. L. Ribeiro, and Y. Messadeq. (2015). "Synthesis and Characterization of Methylcellulose Produced from Bacterial Cellulose under Heterogeneous Condition". Journal of the Brazilian Chemical Society. 26 (9): 1861–1870. 10.5935/0103-5053.20150163.
DOI: https://doi.org/10.5935/0103-5053.20150163[44]L. Rahmidar, E. Irawan, S. Athifah, and T. Sudiarti. (2020). "Synthesis and Characterization of Methylated Cellulose as Biocomposite Hydrogel". International Journal of Scientific and Technology Research. 9 (1): 3993–3996.
[45]A. Biswas, S. Kim, G. W. Selling, and H. N. Cheng. (2014). "Conversion of Agricultural Residues to Carboxymethylcellulose and Carboxymethylcellulose Acetate". Industrial Crops and Products. 60 : 259–265. 10.1016/j.indcrop.2014.06.004.
DOI: https://doi.org/10.1016/j.indcrop.2014.06.004[46]N. Panchan, C. Niamnuy, P. Dittanet, and S. Devahastin. (2018). "Optimization of Synthesis Condition for Carboxymethyl Cellulose-Based Hydrogel from Rice Straw by Microwave-Assisted Method and Its Application in Heavy Metal Ions Removal". Journal of Chemical Technology and Biotechnology. 93 (2): 413–425. 10.1002/jctb.5370.
DOI: https://doi.org/10.1002/jctb.5370[47]M. I. H. Mondal, M. S. Yeasmin, and M. S. Rahman. (2015). "Preparation of Food Grade Carboxymethyl Cellulose from Corn Husk Agrowaste". International Journal of Biological Macromolecules. 79 : 144–150. 10.1016/j.ijbiomac.2015.04.061.
DOI: https://doi.org/10.1016/j.ijbiomac.2015.04.061[48]R. E. Abou-Zeid, N. A. El-Wakil, A. Elgendy, Y. Fahmy, and A. Dufresne. (2021). "Liquid Crystalline Properties of Hydroxypropyl Cellulose Prepared from Dissolved Egyptian Bagasse Pulp". Cellulose Chemistry and Technology. 55 (1): 13–22. 10.35812/CelluloseChemTechnol.2021.55.02.
DOI: https://doi.org/10.35812/CelluloseChemTechnol.2021.55.02[49]C. T. Chen, Y. Huang, C. L. Zhu, Y. Nie, J. Z. Yang, and D. P. Sun. (2014). "Synthesis and Characterization of Hydroxypropyl Cellulose from Bacterial Cellulose". Chinese Journal of Polymer Science. 32 (4): 439–448. 10.1007/s10118-014-1419-8.
DOI: https://doi.org/10.1007/s10118-014-1419-8[50]G. Joshi, V. Rana, S. Naithani, V. K. Varshney, A. Sharma, and J. S. Rawat. (2019). "Chemical Modification of Waste Paper: An Optimization Towards Hydroxypropyl Cellulose Synthesis". Carbohydrate Polymers. 223 (1): 115082. 10.1016/j.carbpol.2019.115082.
DOI: https://doi.org/10.1016/j.carbpol.2019.115082[51]D. W. Marseno, P. Haryanti, B. Adiseno, and H. Haryadi. (2014). "Synthesis and Characterization of Hydroxypropylcellulose from Oil Palm Empty Fruit Bunches (Elaeis guineensis Jacq)". Indonesian Food and Nutrition Progress. 13 (1): 24. 10.22146/jifnp.112.
DOI: https://doi.org/10.22146/jifnp.112[52] M. Eissen and J. O. Metzger. (2002). "Environmental Performance Metrics for Daily Use in Synthetic Chemistry". Chemistry - A European Journal. 8 (16): 3580–3585. 10.1002/1521-3765(20020816)8:16<3580::AID-CHEM3580>3.0.CO;2-J.
